PDA

View Full Version : anyone fitted a 1.6sv



mc_hawkings
01-03-04, 10:59 PM
I should be fitting one tomorrow & would like to know . What wires did you connect from the cav multipug to the cars 1.2 wiring.

thanks

geordie_racer
02-03-04, 05:38 PM
post up the wiring colors from the cav loom and ill tell u where they go

chris

mc_hawkings
02-03-04, 08:46 PM
Ok mate here goes

cav multi plug loom

black-red , probably power

Brown - earth

black ?

brown-white

blue

blue-brown

black-yellow

brown-yellow

green-blue

white-black

blue-white

Thanks if you can help, I think this is mainly ecu

mc_hawkings
03-03-04, 10:46 AM
umm thursday would be good for me geordie. Or if anyone else knows se if you can help

mikeyredtop
03-03-04, 02:30 PM
black red is solinoid on starter not live
brown - earth
black - switched live connect to any thick black wire thers 1 on coil
brown/white is ecu light on dash so connects there
blue is connected to temp sender (not sure tho as green is temp sender 4 dash)
white/blue is connected to alternator output which sends signal to dash
u havent got red/blue which is 4 the fuel pump
all the others are what i dont know!

mc_hawkings
03-03-04, 02:41 PM
Ok thats great thanks six wires bite the dust cool
Another five to figure out. I have found a wiring diagram in the haynes but i dont know how to read it hopefully my mate will help out.

cheers

blue-brown, black-yellow, brown-yellow,
blue-white, green-blue.

Now theres 5 wires to find out

geordie_racer
06-03-04, 10:55 PM
sorry it's tookme so long ended up on different shifts at work,

1, black-red - Starter motor connect to the starter motor

2, Brown - earth connect to a suitable earth the gearbox one will do

3, black - switched live connect to any black wire try the one on the coil

4, brown-white - telltale for brake fluid/handbrake connect to the brown/blue on the nova loom

5, blue - temperature indicator connect to the blue on the nova loom

6, blue-brown - timing control? check the ignition ecu for an identical wire

7, black-yellow timing control/hall sensor check the ignition ecu for an identical wire and check around the dizzy for a plug with this color wire.

8, brown-yellow timing control? check the ignition ecu for an identical wire

9, green-blue - oil pressure telltale connect to same color wire on the nova

10, white-black - vacuum sensor connects to vacuum sensor and the ignition ecu

11, blue-white - alternator? connect to the alternator

think all the above is correct come back to me if you have any other problems

chris