PDA

View Full Version : Help needed


Anonymous
08-05-01, 03:27 PM
i know its the wrong forum and everyone else bloody does it so.....
I need a 2.0 16v driveshaft (astra inners nova outers) (long) will consider buying a pair or maybe even heavy duty ones.
mail me at ian@novaload.net
cheers ian.

*************************
1 cup down 2 to go!
*************************
Anonymous
08-05-01, 03:50 PM
lancy's next door neighbour is breaking a 16V Astra...he mighth have the Astra inners? give him a bell ;)
Anonymous
08-05-01, 03:50 PM
lancy's next door neighbour is breaking a 16V Astra...he might have the Astra inners? give him a bell ;)
Anonymous
08-05-01, 03:53 PM
lancy bought the astra didnt he


[-rexyskittykatty.gif-]
Anonymous
08-05-01, 04:44 PM
no good need the whole shafts need to be specially manufactured for a 2.0 16v conversion, cant use astra stuff.


*************************
1 cup down 2 to go!
*************************
Anonymous
08-05-01, 05:03 PM
WRONG FORUM x-(

Ian, cummon m8 set an example here. or are you

Do as i say, not as i do!

[naked_davo] Look she said she was 16!
Anonymous
08-05-01, 06:06 PM
davo i was following everyone elses example, you are one of the worst offenders for posting crap in every forum so dont lecture :D
do u want the site to crack down on posts in wrong forums?
and i asked for help so it is general hehehe

*************************
1 cup down 2 to go!
*************************
Anonymous
08-05-01, 06:11 PM
try taking to snapped shaft to a driveshaft making place and get them to make u another up with the same dimensions. when i was afet sum for mine the bloke told me that he do em a lot cheaper if he had sum to copy off in the 1st place.

Micky@novaload.net :)
Anonymous
08-05-01, 06:13 PM
so whats the crack with these 2.0 16v driveshafts that makes em so good? surely as you cay ian, there astra inners and nova outers, in which case put 2 and 2 togather and get 1.

if not, then can someone explain coz i was wondiering over the wkend.

cheers

:p
Im tall and your small
:p
Anonymous
08-05-01, 11:40 PM
the drive shaft itself needs shortening and putting into astra inner joints (to mate with the gearbox) and nova outers (to mate with the hub)

BEng Hons Automotive Electronics Engineering :) worship my electronics skills :D