No Horn

[Tazzy]

on friday, i fitted a nardi torino flat base steering wheel, cost me 75 in total for the wheel and hub kit, only problem is now, that i have no horn, as the 2 wires from the original wheel are still on it, and with my mot on wednesday, im gonna have t get summit fixed up pretty quick, but i dont want to have to change them back over, as im going to need a haorn anyway!

how and were can i fit the wire for the horn?

cheerz!

[epo]

u have deffo wired ur horn up right havent u
its earthed up ect

failin that can u not get away with puttin a switch in say where ur choke goes (unless ur cars choke?)

[Tazzy]

my cars an spi!

i havent actually fitted the horn at all, the two wires are attached to the factory wheel, and i cant get them off, but another problem, even if i get them off or even get some new wire(s) ive still got no were to wire it up to!

[mikeoxford]

u need to take the plastic ring of the back of your old steering wheel.

this then goes between the boss and the steering column.

the one wire on your horn push should go to earth, any nut or bolt in the vacinity will do.

then the central wire is the positive feed and goes directly to your horn push down through the steering column,.

it will not work without the pickup ring off the back of the old wheel.