sri clocks

[paul123]

hi
i have sri clocks on the coil which wire do i put it to the black or the green

thanks

[Cheese]

The green wire which should already be connected to the coil is for the rev counter, the other end of it should be taped up in the loom with the multi plug that connects to the back of the clocks.
If you are running a new/replacement wire from the back of the clocks, it needs to be connected to the same terminal as the green wire is/should be - Negative!

[paul123]

thanks i found it on the coil now but i can not find it in the loom up by the clocks but i will run a new wire down to the coil