mk2 dash into a mk1

[adey]

i am after upgrading my mk1 dash to the mk2 as looks alot better

can you gave me advice on how easy/hard it is
and where to get a mk2 dash from at a good price?

[dikharvey]

You will need the entire dash and as much loom as possible, you will also need the under dash selves and the things they slot in to at the sides. centre console (optional) heater vents (the entire middle bit) the control wires that control the temp and the vents, you need the wiper stalk (the mk2 rear wiper is on the stalk so there is no switch on the dash). You'll also need to prepare yourself for the site once removing your old dash! Oh it took me 3 days (and i knew what i was doing)

goto www.nova-land.com there is a guide on there that might help.

Expect to pay about ?60 for the whole lot on ebay. Best to advertise as wanting on on here (and www.migweb.co.uk/forums) or go to a scrapyard.

[2litreturbo]

3 days? it can be done quicker than that. 1 day tops. down the scrappy in the morning to get the old one out. (to save time, take out the whole steering column instead of trying to remove the poxy steering wheel.

Then the rest of the day faffing about with yours.