SR Dials

[adam2472]

Will Mk1 Sr Dials Physically Fit into a MK2? im thinking they probably will but just making sure befor i buy.

Cheers
Ad

[Ben3042]

Depends what model mk2 you have.

There is a green wire coming from the backof the tacho (rev counter) which will need to be connected seperatly from the plug, if your lucky you might already have a wire behind your dash to connect it to, if there isn't one there you will need to connect it up to the coil.

You should connect it to the terminal on the coil the is nearest to the front of the car in order for the tacho to work properly.

You might also need the plug that fits into the back of the clocks from the car the clocks were removed from.

Hope that helps 8)

[adam2472]

The rev counter part sounds fine. dont kow if i like the sounds of chaning the plugs over. the dails i mite get are from an 89Sr and mines a 91 1 litre.

wats the possibility that i will need to change the plug too. chaing the plug sounds like its guna need all re wiring and im not technically minded enought to be doin with that :P