View Full Version : arch rollin
stevous2003
25-11-03, 02:45 PM
ne ideas what is a good quote for having arches rolled, and the best off set for 15's cheers? 8)
Sk8rDude
25-11-03, 02:48 PM
not sure how much arch rollin is. i got ma m8 to do it for me cuz he's a panel beater.
but the proper offset for 15's is ET49
stevous2003
25-11-03, 02:51 PM
cheers mate, ure a star 8)
Sk8rDude
25-11-03, 02:53 PM
no probs
?Marty?
26-11-03, 04:11 AM
Average = ?60 per arch.
novaexplod
26-11-03, 12:40 PM
thort it was 45 offset?? thts wot mine are neway :roll:
Sk8rDude
26-11-03, 01:25 PM
its ET49 for 15's then when u goto 16's 17's etc its ET45
Stanton
26-11-03, 02:52 PM
down here at regal we do it for 40notes an arch
i ground the lip off my rears and rolled the fronts.
Philsutton
26-11-03, 03:34 PM
think they do them for ?20 an arch at just novas.
Dan_white_GTE
26-11-03, 05:09 PM
where bouts is just novas???
mbr1.2i
26-11-03, 08:57 PM
im inc ambridge and a place calld Barrtech over at cowley road dome mine for about 35 notes each arch
?Marty?
27-11-03, 05:10 AM
It cost me ?40 for both rears, done pro. But that's mates rates.
Also, there's a BIG difference between 'rolling' and 'flaring'.
its ET49 for 15's then when u goto 16's 17's etc its ET45
Nope - et49 is the best offest regardless of the size of alloy - I've got 6x16" softstars et49 and they are perfect. When you go up in size to 16", 17" + etc then the width of the alloy has to be taken into consideration - you'd want 6" width maximum to avoid too much messing about, the only 16"s that I know that are 6" wide are the Irmscher and (I think) Speedline Alliesso's, and I've not seen any 4 stud et49 6x17" alloys to date.
?Marty?
28-11-03, 04:55 AM
Which is why 45mm is 'best' for 17's, and possibly 16's, otherwise you will get rubbing on the inside arch/rear dampers.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.