Indicator problems

[portadownfc]

just wired up my digidash (followed the guide on vauxnova.co.uk).

well when i put my hazard relay switch back in and turned it on the hazards didnt flash.

also try the indicator stalks still nothing. have checked all the wiring and fuses but everything was ok.

anyone got any ideas what the problem is and how to fix it.

cheers

John

[locky]

Could be a bad earth?
have u wired the indicaters into the right wires? i made that mistake n took me ages to find!
Otherwise try n hunt down another guide! there was a guide on www.perpetualbliss.net but the site no longer works!

[shabba16]

it may sound stupid but make sure the plugs r pluged onto the stalks proply i have made this mistake before :roll:

[chenco]

make sure the hazzard switch is plugged in properly and the correct way up. this happened to my m8 and his astra and we spend a day trying to fix it going round scrappies getting parts n stuff and then it was coz the switch had come loose.

[Phil GTE]

ask Olly on RB, he had the same problem, but I cant remeber how he fixed it.

[Jon_nova1]

if you look behind the fuse boxes there are more fuses/relay's one isfor the hazard/indicator make sure it's pluuged in properly it might have been knocked out whenyou fiited it