Nova XE conversion

[bertshome]

The anti-roll bar spacers/tie rod spacers,

How high are the blocks that go under the tie-rod mounts and is that all that is required to clear space for the gearbox casing and exhaust manifold.


cheers,

brett

[m.d.]

i put alluminium blocks imbetween the anti roll bar brackets about 30mm thick. this clears the exhaust. i cut the lug off the gearbox and that clears now too. dont cut too deap tho cos i managed to cut into the oil way and had to take the box out agin for it to be welded

[Ste_Nova]

cut the lug on the box level... just leave the arb off