View Full Version : Central Locking questions (new!!)
Hi all
I finally fitted my central locking,
but its well loud!.
also have i wired up the additional motor (drivers) correctly, i just connected it to the pasanger side, so that when the switch is pressed they both lock.
Oh i've left the drivers switch in so i can still loack both doors from inside.
It's all connected to my alarm which works fine but i need a car battery tho :(
So is the central locking supposed to be loud? how can i quieten it?
Thanks
AW3K
could try putting some pipe lagging around the motors etc to muffle the sound, make sure its not banging anything.
could try putting some pipe lagging around the motors etc to muffle the sound, make sure its not banging anything.
good idea
i don't think its the motors as much it mite be the actual lock mech?
did i wire the other solinoid right then? so it works from the pasanger wires?
thats the way i wired mine. i had no prob's with it like that
thats the way i wired mine. i had no prob's with it like that
thanks
hey another yorkshire person (think) i'm not alone lol
i had to bend the rod alittle to make it fit
http://www.a-whiteman.pwp.blueyonder.co.uk/car/lock4.jpg
AW3K
Serialkilla
15-10-03, 11:21 PM
I didn't bend mine like that the rods i was supplied with wheren't long enough.
But cars fitted with C/L are noisey as well so it shouldn't matter to much really as long as it don't exceed 98db your ok lol. :lol:
I didn't bend mine like that the rods i was supplied with wheren't long enough.
But cars fitted with C/L are noisey as well so it shouldn't matter to much really as long as it don't exceed 98db your ok lol. :lol:
that rod is way long , came with the motor i got from maplin they are ok for ?7
gunna get one for the boot next i think
it's not as loud now that i've put the dopor cards back on doh
AW3K
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.