PDA

View Full Version : Dizzy wiring HELP please



Steve0011
31-05-23, 05:36 PM
Finally I have found the connector for my dizzy in a box of bits :thumb:

Does anyone know the location in the loom the wires are?

Below pic of dizzy and the connector

C14SE BTW

Cheers Guys :thumb:

https://i.postimg.cc/9fk2W8Dt/dizzy.jpg

https://i.postimg.cc/C5BzhnMd/dizzy-wire.jpg
:thumb::thumb::thumb::thumb:

Steve0011
31-05-23, 07:41 PM
I've checked the smaller parts of the loom.
One that goes to the injectors
One that goes to the ignition module below coil

No luck ☹️

Steve0011
11-06-23, 02:00 PM
So......after a lot of searching I came across a thread that suggested that there is NO wiring to the dizzy on a C14SE Sri loom??

Can someone confirm that this is correct and that I'm probably looking for something that's not there to begin with LOL

Thanks :thumb:

NovSot
29-01-24, 08:40 PM
Have you considered consulting the C14SE Sri loom documentation or seeking advice on forums that specialize in vehicle wiring for accurate information about the dizzy wiring?