View Full Version : C20let engine mount, where?
kingwick
10-03-19, 02:36 PM
I have 2 engine mounts for my let conversion but I believe they are both wrong. (mount touches idler pulley)
I need to source the proper let item. Can't find any on ebay etc. Think they were originally made by Griffin autos port.
Any help appreciated, thanks [emoji1303]
Sent from my H8216 using Tapatalk
total_vauxhall
10-03-19, 03:57 PM
Just cut the corner out of it and weld a piece back in
total_vauxhall
10-03-19, 04:00 PM
Something like that shapehttps://uploads.tapatalk-cdn.com/20190310/751312ea9b2fdf24ce4c2bc8ff5f6be2.jpg
Sent from my CLT-L29 using Tapatalk
kingwick
10-03-19, 04:32 PM
Yes mate thats exactly what I have
Sent from my H8216 using Tapatalk
kingwick
10-03-19, 04:32 PM
That's the 2 I havehttps://uploads.tapatalk-cdn.com/20190310/27a626e8ecfac402be979fdc254890cf.jpg
Sent from my H8216 using Tapatalk
kingwick
10-03-19, 04:33 PM
I think this is the one I need? https://uploads.tapatalk-cdn.com/20190310/0cb20c3c14b9793570a026b2476074b0.jpg
Sent from my H8216 using Tapatalk
total_vauxhall
10-03-19, 06:00 PM
You running powersteering?
kingwick
10-03-19, 07:46 PM
You running powersteering?No, no power steering
Sent from my H8216 using Tapatalk
total_vauxhall
10-03-19, 07:50 PM
Then that second mount down you have should fit fine mate
That one you posted at the bottom is a powersteering one with a 90 degree corner . Id have thought you need the one with the corner cut off at about 45 degrees to fit around the belt cover
kingwick
10-03-19, 08:22 PM
Thanks. Any idea where I could get tge correct one?? [emoji848]
Sent from my H8216 using Tapatalk
total_vauxhall
12-03-19, 06:35 PM
Looks to me like you already have the correct one . If you have 2 idler pulleys then you need the mount with the corner missing that you already have them are the only 2 mounts i have ever seen baring the one for powersteering belt
total_vauxhall
12-03-19, 06:39 PM
Ignore the rest of my mount as i have used it diffrently but the actual bit that bolts to the motor is the same as the one you have . They are very close to the belt cover but they do fit unless yours has been made wronghttps://uploads.tapatalk-cdn.com/20190312/7a3716690d8a2af27a0905a419437774.jpg
Sent from my CLT-L29 using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.