View Full Version : Big block hub
Hi all , I need to replace my hub , nova has had the big block hub conversion done, any idea what the hub is off , so I can get one order , replace the bearing lase week , (Audi 80 one used ) any help appreciated
ta Ste . 👍
millworm
21-12-18, 10:56 PM
Will be a big block one so, mk2 astra 1.8 upwards cavalier 2.0 ect
millworm
21-12-18, 10:57 PM
They are slightly machined too, there is a guide on here explaing the ins and outs
Milly is right, if you're using Audi 80 bearings then it's the standard Astra hubs, these are an off the shelf item with a bit turned off the back of them I believe.
There might be some part numbers in my thread somewhere.
Thank you gents for the help , got them orderd , hopefully have a tinker over xmas .
Kind regards . Hope every one has a happy xmass .
_Tomiboy
23-12-18, 04:24 PM
With the astra hubs you still need to change a little on the hubs, otherwise it will be 4mm offset, and the brake will not fit.
With the astra hubs you still need to change a little on the hubs, otherwise it will be 4mm offset, and the brake will not fit.
I didn't have this issue?? However am interested to hear about it
_Tomiboy
23-12-18, 08:24 PM
Missed at that time to take photo from the issue.
https://photos.app.goo.gl/vqnxc93gwr3sfXzt6
Here this was the unmachined, and after that made the modification.
This is the picture from the other side pushed in the right position: https://photos.app.goo.gl/yMxBCAac4syhL58M9
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.