View Full Version : Screen fitting
torquey
12-09-18, 07:28 PM
Iam gonna be fitting my new screen and rubber any tips on this? Best to use window cleaner as lube? :thumb:
total_vauxhall
12-09-18, 07:35 PM
I always use washing up liquid and insulated wire it seems to pull round easyer than string . Done loads over the years without a problem
torquey
12-09-18, 07:38 PM
Ok will give that a go. Is it a case of making sure the rubber is nice and lubed up. Thanks pal.
totalnova
12-09-18, 08:00 PM
Washing up liquid is not a good thing to use as it contains a lot of salt, window cleaner works well, and make sure you use a good strong cord, I find the stuff used on washing lines works well.
Rear or front?
I used washing line as it has enough slip on it so didnt need any lube, fnaaahhh
Don't bother with any sealant/adhesive either.
torquey
13-09-18, 02:19 PM
Ok cheers lads.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.