View Full Version : Hazard lights not working ....
Hi so I've connected battery up today to see if all electrics work and I so far have no hazard lights . I removed a toad alarm from the car . The hazard light switch illuminates but will not work. Indicators work ok but if you put hazard switch on they don't work but I presume that part is correct.
Please can anyone help . Are the mk1 hazard switches prone to failure???
millworm
03-03-18, 06:04 PM
Are you sure there wasn't a splice in the alarm to flash the indicators? Might be worth checking
Are you sure there wasn't a splice in the alarm to flash the indicators? Might be worth checking
Yep there certainly was I think 2 of the main wires were cut and it then went through alarm so wen I removed alarm I cut away and connected them back together. Can't remember colours it was over a year ago.
I've just picked up a new hazard switch so I'll try that hopefully Tommorow or Monday. If not it's a case of Tracing wiring etc.
Jonesfach
04-03-18, 10:11 AM
Relay seems to stick when not used for a while. Worth a look
Relay seems to stick when not used for a while. Worth a look
Cheers for suggestions sorted this it was fuse in fuse box. It was missing 🙈
Jonesfach
04-03-18, 10:44 PM
Cheers for suggestions sorted this it was fuse in fuse box. It was missing
Yes that might help lol!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.