View Full Version : C20let clutch cover bolt torque settings please
total_vauxhall
25-11-17, 08:49 PM
As above needed asap please daft question but cant seem to find the correct settings anywere.
Cheers
hope this will help:
torque settings:
valve cover (-Set)
8 Nm
camshaftbearings
M6 10 Nm
M8 20 Nm
camshaft pullies
Trap 01 50 Nm use new bolds and nuts
Trap 02 60°
Trap 03 15°
Spannerroll – Multi-riem/V-snaar
25 Nm
Spaninrichting Multi-riem/V-snaar
20 Nm
Spanrol – tandriem
from 1993 25 Nm
till 1993 25 Nm + 45° + 15° use new bolts
Distributieriemkap
8 Nm
Cilinder Head bolts (use new bolds)
Trap 01 45nm
Trap 02 60graden
Trap 03 60graden
Trap 04 60graden
Trap 05 45graden on hot engine
or: 3x 90degrees per trap
inletmanifold
22 Nm (use new bolds and nuts).
exhaustmanifold
22 Nm (use new bolds and nuts).
sparkplugs
25 Nm
knocksensor
20 Nm
crankshaft pulley
20Nm
crankshaft – main bolt
M12 130 Nm + 40-50° Nieuwe bouten gebruiken.
M16 250 Nm + 40-50° Nieuwe bouten gebruiken.
clutch pressureplate
15 Nm
flywheelbolts
Trap 01 65 Nm Nieuwe bout(en) en moer(en) gebruiken.
Trap 02 30°
Trap 03 15°
oil plug
hex- 45 Nm
Torx – 10 Nm
Oil filter
15 Nm
connecting rod bearing
Trap 01 35 Nm use new bolts and nuts
Trap 02 45°
Trap 03 15°
main bearings
Trap 01 50 Nm Nieuwe use new bolds and nuts
Trap 02 45°
Trap 03 15°.
afr sensor
30 Nm
total_vauxhall
26-11-17, 10:19 AM
Top man
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.