PDA

View Full Version : Small block XE - Oil Recirculation System



novarally
25-04-17, 06:28 PM
Can someone point me in the right direction for information on this modification please?

i think Protec Performance used to sell a kit, but now I can't find any info.

Thanks

toymex
27-04-17, 04:00 PM
Did the engine not come with something,I was led to believe it had an SBD tweaked sump and breather

novarally
27-04-17, 04:57 PM
Did the engine not come with something,I was led to believe it had an SBD tweaked sump and breather

Yes, it did come with a system installed Jezz, but I just wanted to do some research on how other people had done it, but I'm not finding anything via my Google searches.

The set-up on my engine used a Bailey Motorsport oil separator tank from an Escort Cosworth, plus an alloy breather tank.

I've done away with the breather tank and I want to incorporate everything into one larger tank (with a breather). The photos of the engine bay I post up on my Project thread shortly might help to clarify.

boffer8
30-05-17, 03:41 PM
The instruction sheet for this is on the SBD website under the Instruction sheet pages. Easy enough to find through the SBD page

novarally
30-05-17, 09:51 PM
The instruction sheet for this is on the SBD website under the Instruction sheet pages. Easy enough to find through the SBD page

Thanks Ben, you're clearly better at finding stuff than me. I'd looked on the SBD website previously and couldn't find any info.

boffer8
31-05-17, 09:52 AM
Just for you pal :p

http://www.sbdev.co.uk/Info_sheets/Oil_systems/Breathing%20mod%20for%201.6%20XE.pdf