View Full Version : Plastic sleeve that goes through chassis (petrol pipe)
Can anyone's tell me how to remove the plastic sleeve that goes through the rear drivers side of chassis. It's what the petrol pipe slides through . Cheers sam
paul james
19-04-17, 10:37 PM
Its a right pain to remove, soak it with wd40 or similar to give yourself the best chance of getting it out in one piece. I managed to get it out with pliers, but munched it up a bit in the process. Which didn't matter as the chassis had rusted on the wheel arch side anyway, so I welded in new metal and a piece of metal pipe instead.
totalnova
19-04-17, 11:56 PM
Try and find something the same diameter as the pipe, put it up against it from the centre of the car and hit it out towards the arch, its very easy to break though.
Cheers guys will have a go today
slimtater
20-04-17, 09:23 AM
You can still buy new ones from OCP - part number 90128184 and only 1 euro!
http://www.opel-classicparts.de/catalogsearch/result/?___store=b2c_english&q=90128184&___from_store=b2c_deutsch
You can still buy new ones from OCP - part number 90128184 and only 1 euro!
http://www.opel-classicparts.de/catalogsearch/result/?___store=b2c_english&q=90128184&___from_store=b2c_deutsch
Top man I broke it getting out so will buy a new one do they deliver thanks again
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.