Corsa b brake servo clutch issue

[nova20xe]

Hi all. Changing my nova brake servo to a corsa b one purely for looks wise. I'm about to start stripping out through nova stuff but looking at the clutch pedal. Seems to be on the same mount as the brake pedal. How have people got round this seeing as I need the brake pedal out to fit the corsa b one?

[carls nova sri]

There's a how to post in the articles section on how to do this

[nova20xe]

So there is cheers

[carls nova sri]

No problem mate I'm in the process of doing it as well

[nova20xe]

Looks a good mod. I've currently got the servo and pipework off and half removed the brake pedal. By looks of it the clutch needs to come out to get all the brake stuff away but I could be wrong

[carls nova sri]

I'm not that far yet I'm cutting the firewall out for more space

[nova20xe]

I'm keeping mines. Trying to keep my engine bay minimal. Got all the nova stuff out. Unbolted the clutch to slide out the bar running from the old servo to the pedals. Clutch back in and hole drilled for the new servo, gave up last night back of 10, didn't want any angry neighbours with me using a grinder lol

[carls nova sri]

Haha yeah I tend to always upset the neighbors did you get a one of an old corsa or buy brand new

[nova20xe]

I got one out a Corsa but is in good nick. Waiting on the strengthening plate drying before I get the rest fitted now.

[carls nova sri]

:d You getting braided lines then mate that's what I've gone for a hydraulic handbrake

[nova20xe]

Yeh I prob will. But not overly thought that far yet haha

[Benn]

i used the Nova clutch pedal hanger/mount and welded that on to the Corsa bit.

Not 100% pretty. But it is strong as funk with no flex/movement which is what you want. Plus its removeable... Full pics in my build thread...

http://img.photobucket.com/albums/v321/bennh/Car%20Updates%20July%202014%20on/IMG_5034_zpsz80czcvj.jpg (http://smg.photobucket.com/user/bennh/media/Car%20Updates%20July%202014%20on/IMG_5034_zpsz80czcvj.jpg.html)

http://img.photobucket.com/albums/v321/bennh/Car%20Updates%20July%202014%20on/IMAG0001_zpsys9bu1ld.jpg (http://smg.photobucket.com/user/bennh/media/Car%20Updates%20July%202014%20on/IMAG0001_zpsys9bu1ld.jpg.html)

http://img.photobucket.com/albums/v321/bennh/Car%20Updates%20July%202014%20on/IMAG0005_zps4jhtmsgg.jpg (http://smg.photobucket.com/user/bennh/media/Car%20Updates%20July%202014%20on/IMAG0005_zps4jhtmsgg.jpg.html)

[nova20xe]

Nice one. Not fussed about looks just want the strength so I'll prob do this cheers

[Benn]

I was the same. I can put a bar in the hole and nothing moves. Make sure you brace up the bracket too. Loads of photos in my build thread of what i did.