Stuart
07-09-16, 07:12 PM
So both of the nova small block size flanges (or hubs)are worn on the inner edges... Joy.
Euro can't get stock in time.
We see that corsa b ones are the same part number. Found corsa b auto in a scrap yard and stripped the knuckles off both sides.
Get back to the workshop, after stripping all the calipers off etc we check the sizes and the bearing side is fine as that's 34mm but noooooo the splines are much coarser than the nova ones we have which fit mk2 cav 1.6 outers (the old fashioned way).
What the funk is going on?
Does the auto take big block outers or something?
Euro can't get stock in time.
We see that corsa b ones are the same part number. Found corsa b auto in a scrap yard and stripped the knuckles off both sides.
Get back to the workshop, after stripping all the calipers off etc we check the sizes and the bearing side is fine as that's 34mm but noooooo the splines are much coarser than the nova ones we have which fit mk2 cav 1.6 outers (the old fashioned way).
What the funk is going on?
Does the auto take big block outers or something?