1.3sr won't start

[N0V4 JACK16]

Hi all

My sr died 😞 it just cut out while driving. I've checked all usual stuff like leads, plugs etc. I've rebuilt the carb and its getting fuel.

Its had the whole head rebuilt also.

If anyone can help me i'd like to have it running again.
http://uploads.tapatalk-cdn.com/20160821/3bdf81de5bc284cb7c4bd6ac9ba82104.jpg

[millworm]

are you getting a spark then? sounds more like an ignition fault if it just cut out

[N0V4 JACK16]

I'm looking into changing the dizzy. Its been in storage for years and I'm after having it running to possibly sell it on. Can't remember if it was getting a spark or not.

[millworm]

probably dizzy, check the igntion module and coil

[N0V4 JACK16]

I know the dizzy was never changed so chances are your right. Bought a new coil for it

[millworm]

get a multi meter if you don't have one and test it properly otherwise you're just guessing tbh

[garyc]

Module in the Dizzy would be my first port of call.

[garyc]

Module in the Dizzy would be my first port of call.