View Full Version : B+ Head what to look for.........
As topic, is "B+" stamped newhere on the head itself if so where.
Things to look for that are good
Things to look for that are bad
Anything else u wana add as well..........
will
No, a B+ will just look normal from the outside.
Easiest way to see, is to measure the inlet and exhaust valves to see if they are larger than standard. Both will be larger! Check to see if the inlet valves are wasted at the lower end of the stem, i.e get narrower towards the valve face.
Looking at the porting won't tell you much, as it will be similar for the A, B and B+ heads.
MC
elsey197
24-09-03, 10:05 PM
Here is a few pics of mine if it helps mate :)
http://www.novaload.net/forums/album_see.php?id=1964
http://www.novaload.net/forums/album_see.php?id=1965
http://www.novaload.net/forums/album_see.php?id=1966
still cant wait to put this on :wink:
mikeoxford
27-09-03, 11:37 PM
im sure mine had some writing on the base of the valves? like a code or something.......
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.