PDA

View Full Version : Corsa Servo Fitted into Battery Tray Photos


Benn
25-01-16, 06:29 PM
As above, am looking for photos of the Corsa servo/mc fitted in to the Nova battery tray. If pos the bulkhead still fitted. Cause i i fit one mine will keep the bulk head.
As many photos as poss, wip and finished please.
Edd
25-01-16, 07:19 PM
http://i30.photobucket.com/albums/c323/turbocraig/NovaGSi-WIP_pics/work_in_progress002.jpg

http://i30.photobucket.com/albums/c323/turbocraig/NovaGSi-WIP_pics/work_in_progress001.jpg

I followed these
If you have the Base plate it's quite easy to work out
Iain
25-01-16, 08:04 PM
See articles section.
Benn
26-01-16, 03:13 PM
Awesome Edd, thank you, any of yours fitted now?

IaIn, thought most in there have no bulk head....
Edd
26-01-16, 04:35 PM
I will post up some pics of mine tomorrow Benn

I've used a nova MC
Benn
26-01-16, 05:01 PM
Please, why did you swap them?
Iain
26-01-16, 05:01 PM
Imagine mine but with a firewall in place....what's the problem if its not touching?
Benn
26-01-16, 05:05 PM
I wanted to see how much room is there more than anything... But i'll just imagine yours... Cause that will really help.
Iain
26-01-16, 05:07 PM
Well the cylinder doesn't stick out far at all so draw how far the servo comes out the baseplate and you're all good to chop it down to suit
Benn
26-01-16, 05:11 PM
No, i mean how much room it takes up in the scuttle tray.. As i have a few bits in there..
brucer
26-01-16, 05:41 PM
I wanted to see how much room is there more than anything... But i'll just imagine yours... Cause that will really help.

lol
Edd
26-01-16, 06:27 PM
I used a nova MC as there are 4 outlets, corsa has two

You'll have to mess around with bias if you use a corsa MC
Iain
26-01-16, 06:36 PM
How does the standard Nova bias it more towards the front?
Edd
26-01-16, 08:34 PM
Nova MC has the regulators on the two rear outlets
Benn
26-01-16, 10:29 PM
I used a nova MC as there are 4 outlets, corsa has two

You'll have to mess around with bias if you use a corsa MC

Ah yes, as gonna run the single line to the rear like i do now, but fit an adjustable bias. (i was gonna when i first did the single rear line, but the stupid Wilwood one wouldn't stop leaking on the joins. So took it out)
Edd
27-01-16, 11:00 PM
http://i499.photobucket.com/albums/rr359/EDDRODGERS/Mobile%20Uploads/DSC_0037.jpg (http://s499.photobucket.com/user/EDDRODGERS/media/Mobile%20Uploads/DSC_0037.jpg.html)
totalnova
27-01-16, 11:06 PM
That looks well done Edd
darragh792
27-01-16, 11:20 PM
Sorry for hijacking the thread but what's the benefit of the corsa servo over the nova item?
Iain
28-01-16, 08:52 AM
The main reason is binning off the whole balance bar assembly behind the dash, because the pedal hangs out the bottom of the servo basically. Supposed to remove slop and give a better pedal feel.

Ben's going it because he wants to paint the bulkhead and receive compliments at PV Show.
Benn
28-01-16, 02:10 PM
Ben's going it because he wants to paint the bulkhead and receive compliments at PV Show.

And other shows.

I want it for two reasons, one to get it out the bay and for better breaking. as mine isnt as good as i'd like.
Benn
28-01-16, 02:11 PM
Thank you Edd, that's perfect.
brucer
28-01-16, 08:36 PM
http://i499.photobucket.com/albums/rr359/EDDRODGERS/Mobile%20Uploads/DSC_0037.jpg (http://s499.photobucket.com/user/EDDRODGERS/media/Mobile%20Uploads/DSC_0037.jpg.html)


Looks tidy edd, where do you front brake pipes come out?