View Full Version : Braided brake line banjo fittings.
Hey guys, would it be ok to use banjo fittings straight onto the master cylinder when making up braided brake lines?
It would most likely just be the two rear ones with the compensators fitted.
Thanks:thumb:
millworm
24-11-15, 08:38 PM
If it seals then yes, no diffrent to using them on a caliper
I use banjos on the rear wheel cylinders without issues.
mk1nova_rich
24-11-15, 09:05 PM
Most setups I have seen use banjos on the MC, just make sure you use the copper washers
Yes - they are fine - use the copper washers with the rubber inserts if you can - they seal really well.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.