Nobby
13-11-15, 08:31 AM
Hi Guys,
Ive decided to sell my GTE. I have a baby on the way in the next few weeks and don't think i will get the time to do what i want on it and have another project in the pipeline. The car is approx 40% finished to my spec, this would be a very easy winter project as the shell has been painted and is just a plan of bolting all the bits on.
Shell
Genuine GTE Shell all welding has been done as far as i can see and has been waxoiled black at some point.
New rear archs
Shell has been professionally painted in glacier white 3 tiny rust bubbles on drivers door some very small marks here and there. Full cage just been powder coated. All footings for the cage have been welded in. Front seat rails are welded in for bucket seats. The shell has been turreted on the rear. Front bumper will need a small repair where it looks like its been pushed onto a tow bar in storage. There is a dink in the bonnet where some idiot has put a too long bolt in the mounting hole. Dont let this put you off though its a great looking car!
Engine
E16se 1600 fully rebuilt by Philip Nichols Fitted with Kent comnpetition KV30 Camshaft, Piper Vernier pully Engine not timed yet no cambelt fitted) Kent valve springs, ARP Rod bolts. New mains, rings, big ends, head gasket, sump gasket rocker gasket etc etc
Webber twin 40s with throttle cable, linkage, x2 manfolds, alt lowering bracket
Powder coated Rocker cover and brand new oil cap
4-1 manifold
mongoose exhaust system
Brand new facet red top fuel pump and filter king
GSI Radiator and Slimline fan
Suspension/Driveline
Avo Coilovers all round just been repainted
Powder coated engine mounts
Solid Gearbox mounts
Powdercoated Driveshafts with brand new Shaftec Cv Boots
Powdercoated bottom arms, tie rods and tie rod mounts
Polybushed and strengthened Bottom arms
Polybushed Tie rods
Polybushed steering rack mounts
Brand new TREs
Brand new lower ball joints - (not yet fitted)
Corsa Epas steering rack conversion
Corsa Epas steering column (not fitted)
Brand new wheel bearings all round
Front strut brace
Brakes
Vauxhall Corsa GSI 256x20 Calipers
GM Discs
QSP Pads
Brand new Goodrich Braided hoses all round
Brand new copper brake lines ( Apart from the small one to the NSF is missing and the front to rears need fitting but are supplied)
As new rear shoes
Wheels and Tyres
x5 Nova GTE 5j 3 spokes with used 175/50/15 Pirelli p6000s
Misc not fitted
x2 body looms (Not fitted)
GTE Decals (Non Gen)
all reg etched glass and rubber
complete Dash and 6 spoke clocks
GTE steering wheel
gear linkage
alternator
carb fuel tank
Brand new oil pressure sender for clocks
Gte Side skirts
Parts needed -
Seats/Harness, Dizzy, Dizzy loom, fuel lines - possibly more but im building in stages lol
Please see the link from when i bought it -
http://www.pngclub.com/forum/showthread.php?210957-Vauxhall-nova-gte-project-for-sale-1989
Loads of other bits and bobs cant remember them all
Not alot of pics of bodywork but its the same as the link above just under a cover in my garage. Basically all is there to get it on the road as far as i know would be better to call me and have a chat or ask questions.
£2000 firm as it owes me more than that. Future classic and will be a real head turner.
Serious people only please.
Located in West Midlands
http://i1257.photobucket.com/albums/ii501/vinny-jones/IMAG0437.jpg
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/11986575_10155999576155431_4951081937353958071_n.j pg?oh=9a7b7de5e01d6e1eeb7b3d74a802837d&oe=56ACC68A
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/12009841_10156009517200431_7930960427585170802_n.j pg?oh=ffc03103f233b2b0b835947adf3b9548&oe=56BA7E68
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/12109123_10156062983170431_9129317404208930734_n.j pg?oh=887e8c4554819dac87cdf406f2db8db1&oe=56B97CEB
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10435029_10156089063755431_5001435255379601741_n.j pg?oh=bf5e62d0f7393bcf02bc29c8c7581eb7&oe=56AD09F5https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/12032222_10156108560970431_7905765347349783424_n.j pg?oh=4a6ea3d453d881303b192cb8da14a654&oe=56C10B3Ehttps://scontent-lhr3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/12109160_10156129892625431_8522816324948297216_n.j pg?oh=408970c23c810c373451dc75e7fec983&oe=56B939A9https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/12187797_10156130609195431_2296384299787294342_n.j pg?oh=1a57e744744d004114df7993926aa912&oe=56BBA15C
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/12196012_10156146697195431_8692285436298536597_n.j pg?oh=e8c8748cc43fe9b11cfb40c2c527f466&oe=56F30DCC
Ive decided to sell my GTE. I have a baby on the way in the next few weeks and don't think i will get the time to do what i want on it and have another project in the pipeline. The car is approx 40% finished to my spec, this would be a very easy winter project as the shell has been painted and is just a plan of bolting all the bits on.
Shell
Genuine GTE Shell all welding has been done as far as i can see and has been waxoiled black at some point.
New rear archs
Shell has been professionally painted in glacier white 3 tiny rust bubbles on drivers door some very small marks here and there. Full cage just been powder coated. All footings for the cage have been welded in. Front seat rails are welded in for bucket seats. The shell has been turreted on the rear. Front bumper will need a small repair where it looks like its been pushed onto a tow bar in storage. There is a dink in the bonnet where some idiot has put a too long bolt in the mounting hole. Dont let this put you off though its a great looking car!
Engine
E16se 1600 fully rebuilt by Philip Nichols Fitted with Kent comnpetition KV30 Camshaft, Piper Vernier pully Engine not timed yet no cambelt fitted) Kent valve springs, ARP Rod bolts. New mains, rings, big ends, head gasket, sump gasket rocker gasket etc etc
Webber twin 40s with throttle cable, linkage, x2 manfolds, alt lowering bracket
Powder coated Rocker cover and brand new oil cap
4-1 manifold
mongoose exhaust system
Brand new facet red top fuel pump and filter king
GSI Radiator and Slimline fan
Suspension/Driveline
Avo Coilovers all round just been repainted
Powder coated engine mounts
Solid Gearbox mounts
Powdercoated Driveshafts with brand new Shaftec Cv Boots
Powdercoated bottom arms, tie rods and tie rod mounts
Polybushed and strengthened Bottom arms
Polybushed Tie rods
Polybushed steering rack mounts
Brand new TREs
Brand new lower ball joints - (not yet fitted)
Corsa Epas steering rack conversion
Corsa Epas steering column (not fitted)
Brand new wheel bearings all round
Front strut brace
Brakes
Vauxhall Corsa GSI 256x20 Calipers
GM Discs
QSP Pads
Brand new Goodrich Braided hoses all round
Brand new copper brake lines ( Apart from the small one to the NSF is missing and the front to rears need fitting but are supplied)
As new rear shoes
Wheels and Tyres
x5 Nova GTE 5j 3 spokes with used 175/50/15 Pirelli p6000s
Misc not fitted
x2 body looms (Not fitted)
GTE Decals (Non Gen)
all reg etched glass and rubber
complete Dash and 6 spoke clocks
GTE steering wheel
gear linkage
alternator
carb fuel tank
Brand new oil pressure sender for clocks
Gte Side skirts
Parts needed -
Seats/Harness, Dizzy, Dizzy loom, fuel lines - possibly more but im building in stages lol
Please see the link from when i bought it -
http://www.pngclub.com/forum/showthread.php?210957-Vauxhall-nova-gte-project-for-sale-1989
Loads of other bits and bobs cant remember them all
Not alot of pics of bodywork but its the same as the link above just under a cover in my garage. Basically all is there to get it on the road as far as i know would be better to call me and have a chat or ask questions.
£2000 firm as it owes me more than that. Future classic and will be a real head turner.
Serious people only please.
Located in West Midlands
http://i1257.photobucket.com/albums/ii501/vinny-jones/IMAG0437.jpg
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/11986575_10155999576155431_4951081937353958071_n.j pg?oh=9a7b7de5e01d6e1eeb7b3d74a802837d&oe=56ACC68A
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/12009841_10156009517200431_7930960427585170802_n.j pg?oh=ffc03103f233b2b0b835947adf3b9548&oe=56BA7E68
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/12109123_10156062983170431_9129317404208930734_n.j pg?oh=887e8c4554819dac87cdf406f2db8db1&oe=56B97CEB
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10435029_10156089063755431_5001435255379601741_n.j pg?oh=bf5e62d0f7393bcf02bc29c8c7581eb7&oe=56AD09F5https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/12032222_10156108560970431_7905765347349783424_n.j pg?oh=4a6ea3d453d881303b192cb8da14a654&oe=56C10B3Ehttps://scontent-lhr3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/12109160_10156129892625431_8522816324948297216_n.j pg?oh=408970c23c810c373451dc75e7fec983&oe=56B939A9https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/12187797_10156130609195431_2296384299787294342_n.j pg?oh=1a57e744744d004114df7993926aa912&oe=56BBA15C
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/12196012_10156146697195431_8692285436298536597_n.j pg?oh=e8c8748cc43fe9b11cfb40c2c527f466&oe=56F30DCC