View Full Version : C16SE piston ring end gaps
gitters27
29-09-15, 08:37 PM
Iv got Haynes workshop manual but can't find this information in there,any one help?
Isn't it 4 thou per inch? That is about 13 thou on a 1.6
gitters27
30-09-15, 10:21 AM
found it 0.30-0.50
40 thou is approx 1.00mm, so 13 thou is about 0.325mm.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.