PDA

View Full Version : 1300sr nova bits



mike174
22-09-15, 01:35 PM
Nova parts for sale,


Some of these parts came off my old autograss car and are a bit grubby, some parts were just spares and have never seen the track. If you are interested then email or reply to the thread.
Thanks


1 x 1300sr bare block – offers
1x set of 1300 rods with pistons still attached (no big ends) – offers
1 x 1300sr complete bottom end made +40 with oversized pistons (markings on pistons are v 1.00) has been used as my race engine so will need a clean + possible new rings. Is connected to an F10 box, or can come on its own. - £100


1 x f10 box very grubby had as spare, been sat in the garage for a few years.


1 x standard 1300sr head, all there, valves/springs/lifters/cam etc


1 x slightly ported and polished 1300 cylinder head (just valves and valve springs no cam or cam carrier.


1 x 1300sr cam in cam carrier with rocker cover


1x sr bumper, never seen the track, few bumps and scrapes off a road car
1x rear sr bumper never seen the track few bumps and scrapes


1x e-tec front strut brace


1x boot with glass, still has wiper motor, poor condition
1 x bonnet off road car poor condition


1 x set of genuine gm sr/gsi 3 spoke 14 inch alloys, never seen the track, in good condition, too good to race, few dings and bangs, never had them on a car, no centre caps or tyres




Cash on collection, open to offers on the bits, there are other small bits and pieces. They have all been sat in the garage for the past few year though and will all need a clean and may not be in a1 condition. Message if unsure. Parts can be collected from Harrogate or Whitley Bay. I cannot post any.

NormanNova
22-09-15, 05:15 PM
Hi, is the ported/polished head suitable for a 1200 performance block ? Also is the front bumper mk2 ?

mowgli
22-09-15, 07:46 PM
Hi, is the ported/polished head suitable for a 1200 performance block ? Also is the front bumper mk2 ?
it would fit a 12ST block with no trouble. the c12nz thing would be more trouble with the smaller bore size

mike174
22-09-15, 08:03 PM
Bumper is sold sorry

leggattr
22-09-15, 09:21 PM
Able to send pictures of the standard head and cam/carrier?

NormanNova
22-09-15, 09:41 PM
How much for the head then mate ? And how do I tell which engine I've got ?
Would you know If I say it's a 1991 mk2 1.2 saloon ? Cheers

mowgli
22-09-15, 10:06 PM
Has it got a choke or not?

NormanNova
23-09-15, 07:25 AM
Yes it has manual choke

mike174
23-09-15, 10:59 AM
Able to send pictures of the standard head and cam/carrier?

Having trouble sending pictures without them being massive. I can email them, if you PM me your email address?
Cheers

mike174
23-09-15, 11:01 AM
How much for the head then mate ? And how do I tell which engine I've got ?
Would you know If I say it's a 1991 mk2 1.2 saloon ? Cheers

Make me an offer mate, I can get pictures on the weekend. Please note as far as I can tell it is polished and lightly ported, It was deemed illegal for my formula of racing, cam carrier is separate to the head

Andy
23-09-15, 01:59 PM
Very illegal lol
I might know someone for all the engine bits mate hes gonna msg you later.
Btw are you the same lad with the blue class two for sale on facebook grassing parts for sale?

mike174
23-09-15, 04:12 PM
Ve
I might know someone for all the engine bits mate hes gonna msg you later.
Btw are you the same lad with the blue class two for sale on facebook grassing parts for sale?
Some of the parts are provisionally sold pending collection, yeah I've got the blue Nova on Facebook, its off on eBay tonight unless I get an offer

Kevin2014
23-09-15, 10:09 PM
Price for complete bottom end and f10 gearbox please

mike174
23-09-15, 11:01 PM
OTE=Kevin2014;2275397]Price for complete bottom end and f10 gearbox please[/QUOTE]

Its been sold sorry.