Quick question, cross member bolt size

[michael squeak]

Does anyone no the bolt length that goes thru the cross member and holds the tie rods on?
Thanks

[BRoadGhost]

Such a weak point on any proper nova

[meritlover]

I think i just measured one. M10x1.25, 90mm. Grade 10.9

[therealnovaboy]

I think i just measured one. M10x1.25, 90mm. Grade 10.9

If you have lowering blocks for anti dive you will need even longer ones.
should be a short one too at the side. probably the same as above but 30mm.

[therealnovaboy]

Such a weak point on any proper nova

surely the weak point is the cross member not the bolts.