8valve-craig
03-09-15, 12:59 PM
For sale as a Tall engine with no ancillaries. Block, head, sump, all timed up, nothing else.
88mm Omega pistons on std rods / ARP's
Early crank, balanced
Coscast head, ported by hand
Cometic MLS gasket
Bronze guides
Kent double springs
SBD steel caps
Kent 284 / 278 hydralic cams
Kent / SBD pulleys.
All supported by receipts from SBD.
It's a very strong engine, with no issues. Built in 2009 and used as a Hillclimb / Sprint engine until Oct 2014. Since then its done 6 or 7 track days, so very little use.
Previously running fine on Jenvey throttles, MBE and Type C manifold, making 171lbft and 216hp @ Mek in Cheltenham.
£1100ono. Any inspection welcome.
Craig 07557118213
http://i995.photobucket.com/albums/af79/smith9051/IMG_6107_zps5wcqqepg.jpg
88mm Omega pistons on std rods / ARP's
Early crank, balanced
Coscast head, ported by hand
Cometic MLS gasket
Bronze guides
Kent double springs
SBD steel caps
Kent 284 / 278 hydralic cams
Kent / SBD pulleys.
All supported by receipts from SBD.
It's a very strong engine, with no issues. Built in 2009 and used as a Hillclimb / Sprint engine until Oct 2014. Since then its done 6 or 7 track days, so very little use.
Previously running fine on Jenvey throttles, MBE and Type C manifold, making 171lbft and 216hp @ Mek in Cheltenham.
£1100ono. Any inspection welcome.
Craig 07557118213
http://i995.photobucket.com/albums/af79/smith9051/IMG_6107_zps5wcqqepg.jpg