PDA

View Full Version : Whats needed to start XE



steve1434
30-08-15, 09:52 PM
Hi all. Whats the absolute must haves to get a c20xe to run?

I want make sure it runs before doing anymore work.

When I try now it nearly fires up, so am close - currently just squirting a bit of fuel down tb.....

Will F
30-08-15, 10:06 PM
It needs the same as any internal combustion engine...

fuel, air and spark!

Scottcooper85
30-08-15, 10:22 PM
I use a key to start mine lol

steve1434
30-08-15, 11:22 PM
Haha, have fuel air and sparks - and keys....

Benn
31-08-15, 09:56 AM
An ecu.

ShawnAzzopardi
31-08-15, 11:30 AM
A good battery, or else a really steep hill for a pushstart.

mowgli
31-08-15, 12:17 PM
Have you looked in the how to articles? It's most likely weather a sensor fault or you've not got the right positive feed to the ecu.

steve1434
01-09-15, 07:15 AM
Got all the above, sensors all good so far. Getting pops and farts but no idle. Icv okay, earths okay although I only have two that I can find on inlet - some guides say you should have three?

Benn
01-09-15, 12:38 PM
How do you know the ICV is ok?

steve1434
01-09-15, 01:00 PM
Tested on another engine. I guess that even if the icv was knackered it would still fire up though?

Will F
01-09-15, 05:57 PM
Yep -it would still start - if its popping and backfiring through the inlet(?) I would say your leads are on wrong...?