PDA

View Full Version : SWAP? Vauxhall Nova C20LET for a Standard looking GSI GTE SR SRI Etc



Nobby
18-07-15, 10:49 PM
Hi guys just putting this out there. I have a baby on the way and would love a stock/lightly modded sporty Nova so i can keep playing and get my unborn daughter and wife in as well lol So looking to swap or gauge interest in the sale of mine? What you got?

My Nova spec =

Engine

Rebuilt engine by Steveboyslim off migweb new Water pump, cambelt kit, rings,mains,big ends,head gasket, head bolts etc, rocker cover gasket only run on GM 10w40 oil. (Has a sump gasket leak like most though)
Coscast head
Volvo td04 turbo
Adam Beard tubular manifold
Saab red injectors
Fuel reg blank
NGK BCR8ES plugs gapped to 0.6
Cosworth fuel regulator
Ebay Universal inter cooler
2.25 boost pipes
Evo 5 chips
Ramair filter
SPI Fuel tank
Walbro internal fuel pump
Custom 2.25 downpipe
3 inch diy exhaust
New Radiator running waterwetter coolant additive and slimline rad fan
AEM wideband
Oil temp gauge
Boost gauge
Big rev counter with shift light

Engine made 265bhp 278llbft on15psi @ 5300 rpm but kept blowing a boost pipe off, boost pipe was then swadged and no problem since but not been back on the rollers....the tester said it should make about 280-290bhp @ flywheel.


Transmisson/ Driveline
F20 Geabox
Griffin equal length shafts
Solid engine gearbox mounts
500 Mile LMF Hubs and new front bearings

Brakes

Fiat Turbo discs (have a judder under hard braking)
Calibra Turbo calipers with new pads
Fiat turbo discs Cali turbo calipers
Braided hoses all round

Suspension

Avo coilovers front and rear (NSF adjuster has a seized adjuster)
Full Safety devices cage welded in rear bolted front with door bars
Front strutbrace
Polybushed rear beam,lower arms and tie rods

Shell

1985 1.2 GL shell registered 2.0 on logbook
seam welded engine bay
Rear perspex windows
Front Nova GTE doorcards
Bucket Seats
Sparco Harness's
Astra GTE 3spoke steering wheel
Cesaro alloy wheels with Toyo t1r tyres 1 has side wall scrubbage
Slim front bumper modded to suit intercooler
Rear bumper cut to suit exhaust

Rear arches need replaing - supplied
sills have surface rust
front wings have been cut to fit big wheels
intercooler cutout isnt pretty
some scabs here and there
bonnet hinges are shot as the bonnet came up on me but still shuts ok with pins

basically a solid track car that runs well and has a if it works don't fix it attitude with a few knocks and bangs being stripped out, would benefit from a bodywork resto, smokes slightly in traffic on idle but never bothered me no play in turbo. The car was entered at TOTB trials at PVS 2015 and qualified with a 12.4 pass with more to come. Please serious interest only.

£3500 or swap
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/11412143_823061321095291_537442126728473608_n.jpg? oh=efc1e0c817e0720f50799f1d93fa521a&oe=5617B8A9
https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/11402673_823061291095294_1958668007105402862_n.jpg ?oh=66f8481cfbe83ce67376c58f20cb50f6&oe=56143CCBhttps://scontent-lhr3-1.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/11149573_866600340072611_5309642630151167031_n.jpg ?oh=3584d23bd506315712d7bccabce902bb&oe=56128383https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10155732_10153493652947262_1653270409541563316_n.j pg?oh=78d62dea39990e62f6d61e71d58a05b4&oe=56493E8A

Retro show 2015 12.6 run

https://www.youtube.com/watch?v=VnTUEdv_bgM (https://www.youtube.com/watch?v=VnTUEdv_bgM)

dudley
20-07-15, 11:18 AM
PM'd

millworm
20-07-15, 11:56 AM
Would imagine that's mine out the picture then lol

svlet
29-10-15, 06:42 PM
Has this got any rust bud

Nobby
30-10-15, 08:23 PM
Broke for spares mate long gone

svlet
31-10-15, 09:05 AM
:( another one iv missed