e16se engine wanted spares or repair considered

[Andy]

Want an e/c16se engine to build up as a spare.
bottom ends and heads whatever youve got really.
Will consider anything aslong as its not put a conrod through the block etc.
pm me or reply to the thread.
Please note im NOT INTERESTED in turbo builds or fettled heads/cams etc.The class rules state it has to be standard.

[SR-Rally]

I have an E16SE bottom end with crank but no pistons or rods. Bored been coated in grease to stop rusting. Also have 2 1600 standard heads. If you interested send me pm. They are in Cardiff South wales

[Andy]

Bump

[Edd]

I know I'm a bit far away but......

E16SE head here, won't want much for it

Also got a C16SE engine that I want out my way, no exhaust or inlet

If your interested let me know mate

[Andy]

Bump for this.Blew my engine up again today so need a bottom end.any about reasonably local?

[dgbnova#1]

I've got a 16nv bottom end and a full 1.6 nz engine comeing out this week if Any good think the nv needs rings on no4 piston

[Jim]

I have a 1.6 8v bottom end. It's been bored out to 1650 cc though, is this against the class rules? It's also been shot-peened, de-seamed, brodled. I also have the following components:

New oil pump:

https://scontent.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/11536345_10153282707685546_3854938306326354617_n.j pg?oh=b90c328713e226a63c0c022febf53522&oe=5611C980

https://scontent.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10995498_10153282707760546_4401353934153926847_n.j pg?oh=1b051ba45f4160ec082203313d7635f7&oe=564C7232

Mahle Pistons:

https://scontent.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/10422089_10153282707830546_4245377947671438536_n.j pg?oh=b4792fd8e7ff88393f9c1782c4a44001&oe=564E6665

https://scontent.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10363386_10153282708015546_4771908291488269547_n.j pg?oh=99fbb93e4a9f5076f7f3e70f95752ac5&oe=5651FEE6

ARP Rod Bolts:

https://scontent.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/10882191_10153282708115546_8015003275103377348_n.j pg?oh=e61b6afa5b56ceaae30212e57f1f934b&oe=5654C4F0

https://scontent.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10672269_10153282708135546_347297756966814303_n.jp g?oh=58b69875832108cb6730b6b363644958&oe=565A5ED0

Both types of Engine Bearings:

https://scontent.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/11407147_10153282708205546_4716098001524230865_n.j pg?oh=2fed469f652c96594b13eb5d79038ee1&oe=56121496

https://scontent.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10301932_10153282708355546_6144108881248313797_n.j pg?oh=2e2c2a74aebb4daefedcb702117bc350&oe=56142E96

https://scontent.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/11401259_10153282708475546_8744947376735648921_n.j pg?oh=31eb8df4829244be1d7e709f79d44ef3&oe=5658617B

https://scontent.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10671287_10153282708505546_1037102992218101922_n.j pg?oh=7af3a49bee7b088ed66afebdb0a8d4f8&oe=564D1A0D

I was planning to build up my engine and Nova, but life got in the way :(

This has all been in dry storage and never been fitted.

Let me know if you're interested.

Jim.

[Andy]

Dgbnova,sorry but theyre not what im after.thanks for the offer though.
jim,once i assess the damage i may well have some of them parts.cheers.

[Andy]

Bump for this.

[Andy]

Anyone?

[Andy]

Bump

[Andy]

Pointless bump to a crowd of about 8users lol

[Edd]

lol

[mowgli]

Andy. There will be a bottom end from mine available soon......

[Andy]

Keep me posted cheers.

[Andy]

Urgently required

[Andy]

Bump

[Andy]

Again