View Full Version : F20 gearbox
I am after some advice ,I am possibly going a different route with my engine and will need to fit an F20 gearbox ,I have no experience with these ,so what differs in relation to a F13 box and the mounts .Do the F13 front and rear mounts fit ,if not can you buy the correct ones if not has anybody got pics of how they have done there's .:thumb:
Rear mount is the same, but you'll want a spcer kit. 3 shaped plates with 3 holes in, the gear box sits over a bit thats all. I wanted mine to the mount to make life easier when fitting and removing.
The front mount is the same.
Cv's are different tho. Your linkage might need adjusting too.
Thanks Ben Have you any pics of what is required for the rear ,when you say it sits over a bit in which direction ,I know the cv,s etc will need changing ,but I just want to understand where in the engine bay it sits compared with the smaller box
I think the casing it smaller on the back, so it sits closer to the pass side than a small block nova box. Sits in the bay just the same tho.
So you get 3 spacers... You can buy the kit online, for ease.
http://i.ebayimg.com/00/s/NDUwWDgwMA==/z/0SsAAOSwirZTyFLw/$_35.GIF
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.