Blinkers in Mk1

[Elstro1988]

My indicators have decided to stop working. Have done the obvious stuff (changed the fuse) and put in a new relay but still nothing. Have ordered a new column stalk and another spare relay just in case. I've contacted my garage as I'm **** with electrics and don't want to start taking the loom apart as I still need to get to work every day and have no other real means of getting in due to my unsociable hours.

Is it something stupidly and painfully simple?

[Royston]

Have both L & RH gone off?

Have you used the hazard switch?

If so I would check it/connections

Try switching the hazards on for a while then turn them off

My Rover SD1 can be iffy after the hazards have been on for the MOT, cycling the switch normally sorts it

[millworm]

The hazard light switch is a realy for the indicators iirc

[Andy]

The hazard light switch is a realy for the indicators iirc
it really isn't mate.....
check the earth connection behind passenger headlight.

[millworm]

not a relay as such but i know if it's a duff switch then it'll stop the indicators from working, happened in mine before.