RFX Alloys

[murph-gsi]

Quick question. Will 15 inch alloys with a 35 offset fit a Nova. Also I know they are too much sticking out.

So How much can I take off the hub? 10mm?

Will it bring it too close to the suspension?

[mowgli]

this is a 'how long is a piece of string' sort of question..

if your car is massively low, then it would hit the arch, if you skim the inside face, it could hit the suspension.

it should be ET49 and no more than 6" wide to fit like a factory wheel.

what width is the rim?

[murph-gsi]

I am almost sure they are 6 but maybe 6 and a half. They have a 195/50 R15 tyre in them.

[grooge]

ive been thinking of taking some material off the hub on a set of wheels i have. they're et35 and 7" wide. they just fit on my hatch with rolled archesand 195/45 tyres but scrub with any weight in the back. they do have a good amount of clearance to the shock though, over 10mm from memory, which is why i was thinking of taking some material off at the hub

[murph-gsi]

Also they have rally tarmac cup inserts in them. Can they be removed?

[millworm]

I run identical setup on my loon, fronts poke a touch and the rears are ok bit I have round arch so may be different for you