throttle cable?

[turbojolt]

Where can i get one cant find one on ebay or at my local motorfactors?


Or is there another cable that works on a carb nova....cheers

[meritlover]

SPI Corsa B?

[millworm]

Very hard to get hold of, try here. Gm never made any replacement parts I don't think

[turbojolt]

Millworm if you have attached a link i cant click it :/

[hotrod]

What throttle cable you after bud?

[turbojolt]

One that will fit...running a 12st with a 13sb inlet and carb

[pottersrebel]

don't know if any use but I use an astra mk3 throttle cable on my 1300 corsa stockcar it has the right ends to work with a pierberg 2e3 but is a bit longer than the nova cable

[turbojolt]

Ive been unknowenly trying to use a old xe throttle cable thats to long and dosnt fit on the pedal right so falls off all the time :/

[hotrod]

I got a couple of random cables here. If its a length issue I could measure some up.

[Southie]

Ive been unknowenly trying to use a old xe throttle cable thats to long and dosnt fit on the pedal right so falls off all the time :/
I have had a bit of a cowboy way of doing this. On my old SR basically I cut the cable shorter and got a chocablock terminal that is used for stereo wiring and then attached that to the cables at each end.
it worked for over 2 years btw ;)

[benw456]

IV got a cable here mate off the nova iv just broken for bits.

[millworm]

Millworm if you have attached a link i cant click it :/

I ment in the forum on general

[jimbob-mcgrew]

I have had a bit of a cowboy way of doing this. On my old SR basically I cut the cable shorter and got a chocablock terminal that is used for stereo wiring and then attached that to the cables at each end.
it worked for over 2 years btw ;)

2 years you got away with that ! .. haha

you need another nova southie :)
project chockablock :thumb:

if your using a long c20xe cable TJ, you might get away with putting a piece of rubber pipe over the end of the cable to take up the slack. at the throttle body end i mean, where the cable is in its holder.
bit of a cowboy job, but like southie said, even bodges can last if you do them right :)