PDA

View Full Version : Nova mk2 1.2 merit + heating will not work



stockcar123
14-10-14, 10:45 AM
Hi my heating will not work and i have tried bleeding the system by taking the coolant bottle lid off and turning on the blower motor full and there were no air bubbles coming up to the top of the coolant bottle and i've checked both the heater matrix pipes and they are both hot when the engine heats up i don't know what else could cause the heating not to work could it be when i turn the heater control knob it feels like your not doing much any suggestions.

Andy
14-10-14, 11:06 AM
sounds to me like youre answering your own question there...

stockcar123
14-10-14, 11:27 AM
Ye I'm going to take the heater control knob off and check ye cable and that to see what's happening when I turn it

Andy
14-10-14, 11:36 AM
my moneys on its unseated or snapped off,at either end

stockcar123
14-10-14, 12:22 PM
Found the problem the cable is still connected at both ends but whe. I turn it the valve above the matrix doesn't open it looks like the black plastic that is going round the cable is just moving up and down whe. I turn it any suggestions

Andy
14-10-14, 01:12 PM
cables broke off its mount?

stockcar123
14-10-14, 01:22 PM
ye one of the clips has come of like this blue one in this picture http://i57.tinypic.com/a23k94.jpg

Nobby
15-10-14, 12:57 PM
just pull it by hand my nova has no cables so i do the reach around lol