scott.parker
04-10-14, 04:37 PM
Right, I've noticed that the inlet I've got with my let has a few bits that look slightly damaged etc, so I've got and old xe inlet, it looks slightly different from the outside on the casting, but is there a difference at all between them to stop me using the xe one, and I'm guessing I'll have to use the let tb on it as I can see it's different for the vacuum pipes etc.
Then my next question is, can I grind off parts of the casting from my xe type one to smooth it off a bit, or is the cast in such a way that if would make holes in the inlet walls??
Let inlet Small damage to injector opening.
http://tapatalk.imageshack.com/v2/14/10/04/2863b1cdb6ff8f58160b3aac30efb34f.jpg
Both side by side, xe left, let right.
http://tapatalk.imageshack.com/v2/14/10/04/0f0afdf1614cd16489fa3d945301a46d.jpg
Xe
http://tapatalk.imageshack.com/v2/14/10/04/b13cbab8b80de8dde715c7025837b81e.jpg
Let
http://tapatalk.imageshack.com/v2/14/10/04/1b82e8734de31e5e9777dd68997a9c48.jpg
Inside, xe
http://tapatalk.imageshack.com/v2/14/10/04/d96b3f4f447c545aaa3d1350070843e5.jpg
Inside let (some **** in side..)
http://tapatalk.imageshack.com/v2/14/10/04/0bc0114e515a663d42def8a1f5bce2c3.jpg
Xe tb
http://tapatalk.imageshack.com/v2/14/10/04/7fc439ea071680ccf638640f0bd5531e.jpg
Let tb
http://tapatalk.imageshack.com/v2/14/10/04/ccaffbbd1b5fe771336f873412771430.jpg
Help, advice etc would be brilliant, cheers.
Then my next question is, can I grind off parts of the casting from my xe type one to smooth it off a bit, or is the cast in such a way that if would make holes in the inlet walls??
Let inlet Small damage to injector opening.
http://tapatalk.imageshack.com/v2/14/10/04/2863b1cdb6ff8f58160b3aac30efb34f.jpg
Both side by side, xe left, let right.
http://tapatalk.imageshack.com/v2/14/10/04/0f0afdf1614cd16489fa3d945301a46d.jpg
Xe
http://tapatalk.imageshack.com/v2/14/10/04/b13cbab8b80de8dde715c7025837b81e.jpg
Let
http://tapatalk.imageshack.com/v2/14/10/04/1b82e8734de31e5e9777dd68997a9c48.jpg
Inside, xe
http://tapatalk.imageshack.com/v2/14/10/04/d96b3f4f447c545aaa3d1350070843e5.jpg
Inside let (some **** in side..)
http://tapatalk.imageshack.com/v2/14/10/04/0bc0114e515a663d42def8a1f5bce2c3.jpg
Xe tb
http://tapatalk.imageshack.com/v2/14/10/04/7fc439ea071680ccf638640f0bd5531e.jpg
Let tb
http://tapatalk.imageshack.com/v2/14/10/04/ccaffbbd1b5fe771336f873412771430.jpg
Help, advice etc would be brilliant, cheers.