14nv with 1300 sr inlet and carb?

[turbojolt]

what would need doing to remove the spi inlet and adding the 1300sr inlet and carb I have in the garage?

Im thinking I will have to chop out all the spi wiring and ecu and just use the basic wiring that came on the car as standard

would I need to change the fuel pump/tank?


any help would be great :thumb:

[Novasport]

1.3 cylinder head.
You could use an injection tank and pump but you would need some kind of fuel pressure regulator

[turbojolt]

No just the inlet manifold and the carb the engine will be a complete 14nv

[Gibbo]

be easier to swap the tank.

edit: if you swap the tank and carb you will also need the mechanical pump on the engine.

[Novasport]

1.3 SR inlet will not fit a 14NV head though, the 13SB has cathedral ports and the 14NV has square ports iirc

[jimbob-mcgrew]

i think you mean the 14 ' NZ ' , the SPI head, which has the rectangular ports, and no mechanical pump ?

not sure on valve size's of the SPI heads, but they have awful economy profile cams, so not the best head to start with.