View Full Version : 15" bannded steels on saloon
turbojolt
31-08-14, 08:27 PM
ive got a set of 15 "steels and I was wondering how much I can get away with if I had them banded (for mega street rep yo!) with out running into clearance issue?
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/72170_10151555583312118_478293379_n.jpg?oh=916dc04 902612a353aad0c6480c00bd2&oe=546FDD04&__gda__=1416135031_7135dea14c700d0eef62fef004bb17f a
any help would be great. cheers
turbojolt
31-08-14, 08:28 PM
specs if it helps
https://scontent-b-lhr.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/62593_10151555584602118_1190122447_n.jpg?oh=980201 9182311201de6a2a427e3829f5&oe=545EE565
millworm
31-08-14, 08:39 PM
Easliy could could to 7j, maybe 8j on the rears with stretched tyres
turbojolt
31-08-14, 09:02 PM
I don't like the staggered look. what's a health sized tyre to stretch on 7j then?
millworm
31-08-14, 09:09 PM
195 will give you a flush look, 185 is one profile below what they should be, 175 will give you more strech. personally i'd go 185
+1.5" so 7J would look nice on those I reckon.
turbojolt
01-09-14, 07:39 PM
Its being added to the list
tommy8252
01-09-14, 10:13 PM
You can push to 7.5j on the rear with some minimum arch rolling and around 80mm lowering max
Novasport
01-09-14, 10:30 PM
I don't think you will get the best results with that design of wheel.
turbojolt
01-09-14, 11:12 PM
I don't think you will get the best results with that design of wheel.
Why?
Novasport
01-09-14, 11:23 PM
Because the pressed spokes take up most of the standard dish so even banded I do not think would give a nice dished rim.
jimbob-mcgrew
04-09-14, 08:58 AM
i dont wanna sound like an arsehole TJ, but i have to say it, for the sake of your wallet and possible dissapointment. ive heard a lot of people in the vaux community slag these wheels off for not suiting anything, and personally i think there horrible wheels. they dont even seem to work on the mk.3 astra's they came on.
again im not trying to be nasty, just being honest, and i dont want you to throw loads of money at them, getting them cut & shut modified with expensive rubber, and then them not suiting the saloon.
https://farm8.staticflickr.com/7314/14054650744_3647ab73f7_b.jpg
http://i49.photobucket.com/albums/f266/Dragonfly_SS/AOCHorseShoePass002.jpg
http://i96.photobucket.com/albums/l195/vle41m/CORSA%20MERIT/DSC00306.jpg
turbojolt
04-09-14, 06:00 PM
Guess i will have to see how opnion is split once ive had then done. im not easily swayed by popular opnion tbh not everybody will like everything you do to or with a car. the only real opnion that matters are the ones of the people that own the motor :)
scott.parker
04-09-14, 07:22 PM
Upto 7" 165/50
Banded steel wheels = nightmare to balance up
millworm
05-09-14, 11:50 AM
Check out bullet steel wheels
You won't be able to band them as the spokes come out onto the face of the rim unless you have them cut flush and welded to inner part of the rim.
turbojolt
06-09-14, 09:16 AM
Check out bullet steel wheels
Love those but with them being et5 i would have to spend a bomb on spacers
turbojolt
06-09-14, 09:16 AM
Check out bullet steel wheels
Love those but with them being et5 i would have to spend a bomb on spacers
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.