Z18xe parts list

[totalnova]

In the next few moths when the shell is ready I'll be installing the z18xe small block into the nova, I was wondering if people can help me with the list of parts I will need please.
So far........
engine (obviously)
gear box f15 with cable speedo and cable clutch
ill be using nova drive shafts? Correct?
Now will I need the doner ecu and engine loom?
I know I'll need to use a cable throttle body

Have I missed anything? and thanks in advance. Nick.

[tom reid]

If you need any bits, let me know, I have a mate very close to you who can help with Vauxhall parts.

[totalnova]

If you need any bits, let me know, I have a mate very close to you who can help with Vauxhall parts.

Cheers, are we talking new parts or used?

[bazil]

Use a X18XE1,

Z18 ecu probably wont work when you replace the throttle body to cable operation, the ecu would need input from the fly by wire throttle which you wont be using.

[_Tomiboy]

You can use the drive by wire throttle body. You need the ecu, the immo ring and key chip, and the engine loom from the donor car. It helps also if you put the obd wire also, and you can check the engine with opcom.

[totalnova]

I've already got a x18xe1 throttle I was hoping it would be ok to swap it over

[totalnova]

You can use the drive by wire throttle body. You need the ecu, the immo ring and key chip, and the engine loom from the donor car. It helps also if you put the obd wire also, and you can check the engine with opcom.

How would you use fly by wire throttle body? Surely the pedal would need to be modified?

[tom reid]

Cheers, are we talking new parts or used?

Both, or recon and competition

[_Tomiboy]

That was my z18xe setup. http://www.migweb.co.uk/forums/projects-restorations/425927-corsa-b-z18xe.html

[totalnova]

That was my z18xe setup. http://www.migweb.co.uk/forums/projects-restorations/425927-corsa-b-z18xe.html

Sorry to be pain but could you explain what needs to be done I see you have made some modification to the throttle body.

[_Tomiboy]

The throttle sensor is from Vectra B 2001 z18xe, the steel holder also, i made the aluminium holder, and on that aluminium holder is the original corsa throttle cabel thing what comes from c16se or c14se.

[_Tomiboy]

You need this part: http://www.ebay.co.uk/itm/Vectra-B-95-01-throttle-accelerator-pedal-sensor-0-281-002-297-09129106-2-2-D-/151393840197?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AVauxhall%7CModel%3AVectra%7CPlat_G en%3AB&hash=item233fc6ac45

[totalnova]

so i hope ive got this right.....

the pedal fly by wire sensor is mounted in the engine bay, connected to the throttle cable that would normally be connected to the throttle body and you keep the fly by wire throttle body from the z18xe inplace?

[_Tomiboy]

Yes, correct. I have z18xe throttle body if you need it.

[totalnova]

Perfect thanks for your help, I don't need the throttle body but thanks for offering.