View Full Version : fueling
Aidan Chubbaa Chaplin
28-08-14, 03:06 AM
Hi I've just bought a project nova and I need to no how the fuel pipes from the tank to engine run if anyone has pictures it be massive help thanks aidan
Depends on what engine,
Injection or carb
What fuel tank
What fuel pump
For instance a GSI is different from a 1litre base spec which is different from a 1.2spi which is different from a 1.3sr which is different from a diesel
Aidan Chubbaa Chaplin
29-08-14, 12:18 AM
It's a 1.2 spi
dgbnova#1
29-08-14, 08:04 AM
You will need a pipe from the pump at the top of the tank to the carb 8mm pipe then a return to the tank will be a pipe at the middle front of the tank that's the return
if it was me I would run 8 mm pipe for both then if you upgrade engine it's already done this is in copper tube btw for plumbing
it runs along the drivers side floor there should be metal tabs on the floor you put some 25 mm off cuts of pipe over the copper to protect it from the steel tabs so one off cut per pipe per tab so aprox 10 per side at a guess
Aidan Chubbaa Chaplin
30-08-14, 12:14 AM
Okkkay thanks and yeah I'm putting a 2.0 8v turbo in it and also you got any pictures of how the pipes routes just so I can follow it to make it abit easyer for me
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.