PDA

View Full Version : 14/16XE small block parts, custom inlet, protech SS manifold, corsa D vxr turbo setup



scott.parker
08-07-14, 05:54 PM
As per title, i have a C/X14/16XE custom inlet manifold, it's been constructed to be used under boost pressure for a turbo setup, it's complete with TB vacuum pionts, fuel rail/injectiors etc.
The inlet is £190 (no offers its what I paid) collection, or post at extra cost.

Also as mentioned is a corsaD vxr turbo setup, it was bought from a guy who upgraded his setup after a year, the turbo is like new only cover approximately 12-15k
£220 ovno (as this is the going rate) again collection preferred, or postage is extra.

http://img.tapatalk.com/d/14/07/09/a4unyjyt.jpg



I could possibly take items to billing, but would like a deposit, as last year i took items then got let down.

Location is Stratford upon Avon Warwickshire

Pm via here.

scott.parker
09-07-14, 02:14 PM
http://img.tapatalk.com/d/14/07/09/2u6ajugy.jpg

http://img.tapatalk.com/d/14/07/09/yvehetup.jpg

http://img.tapatalk.com/d/14/07/09/a9asy7a7.jpg

http://img.tapatalk.com/d/14/07/09/yrude2am.jpg

scott.parker
10-07-14, 11:07 PM
Can still bring stuff to billing.. Goes on ebay Monday.

AndyRandz
15-07-14, 01:18 AM
Not to familiar with turboing the c16xe, but am curious. Do I need that inlet to run the turbo kit or will it work on my velos power box?
Any other things I'd need to do other than oil filter relocation or just bolt on job?
how much sting can the standard rods take? Can I get away to run a low boost? don't intend on forging or out like that

scott.parker
22-07-14, 01:36 AM
All parts on eBay.

scott.parker
30-07-14, 12:28 AM
Up

scott.parker
09-09-14, 09:26 PM
Up, prices reduced, open to any close sensible offers, or a deal on the two bought together.

NormanNova
09-09-14, 10:00 PM
What size engine will the turbo fit mate ?

jimbob-mcgrew
09-09-14, 10:35 PM
is that tig welded, directly to the manifold ? ... looks pretty nice

scott.parker
10-09-14, 12:32 AM
What size engine will the turbo fit mate ?
C/X 16 engines, and the Z18xe1 small block 1800.


is that tig welded, directly to the manifold ? ... looks pretty nice

Yes, it's a standard inlet cut down with the custom chamber tig welded to it, it's designed to hold boost pressures.

scott.parker
27-09-14, 10:42 AM
Prices reduced. Bttt

scott.parker
04-10-14, 04:23 PM
Back to the top.. Open to offers.

scott.parker
22-10-14, 03:57 PM
Turbo and inlet still here.....

scott.parker
21-11-14, 05:24 PM
ALL ITEMS SOLD, can be deleted.