C14SE hunting/stalls

[TonySR]

Anyone got pictures of their vacuum hoses on a c14se? Want to check mine are right as it stalls or the revs drop to around 400rpm or it takes a few seconds to settle down after being revved.

[millworm]

Checked brake servo hose?

[TonySR]

Yeah, I've blanked off a small hose on that as I wasn't sure where it goes?

[thespannerman]

Back of the throttle body is for map sensor, end of the manifold is FPR, the one underneath the throttle body was blanked off on mine. If its a dizzy engine there may be one from servo pipe to the dizzy. Hope this helps

[Southie]

@TonySR, this might help you:
http://www.pngclub.com/forum/showthread.php?167669-c14se-vac-pipes

[TonySR]

Cheers Southie. The hose on the bottom of the TB was blanked so I reconnected it and the valve on the servo pipe with a hose off the x16xe donor, but it's still the same. Any idea's? Failing that, anyone got a 1.2i speedo sensor so I can fit the XE?