View Full Version : 15in 7j et37 wheels on a hatch
blue_peg_16v
03-06-14, 01:36 PM
Anyone running 15in 7j et37 wheels on a hatch with a decent drop?
seen the wheels I want for the sr but unsure on fitment
millworm
03-06-14, 02:23 PM
I ran 15" 7j et35 on my loon lowered but obvs that has round arches
Novasport
03-06-14, 02:41 PM
Think you will struggle without pulling the arches quite a bit.
Get the offset machine out more. Most wheels you'll be able to take 3-5 mm off.
i've 7j et49 on my hatch, lowered i think 80mm, springs are tiny, tyres are tucked up inside the arch and its very very tight. will scrub with a lot of weight in the back as i found out taking a few scrap gearboxes to the bridge the other day
craig green
03-06-14, 05:24 PM
No chance! With that offset & that width.
Will look very aggressive on such a small car too.
blue_peg_16v
03-06-14, 11:15 PM
Looks like ronal turbos are out the window the
Looks like ronal turbos are out the window thelol, they fit fine, but thats with arch extensions
blue_peg_16v
04-06-14, 08:59 AM
How hard will it be to find some comp th's then to get polished lol
You can buy them new still.... Get ya wallet out.
Calamity Josh
04-06-14, 11:19 AM
my oz's are really really high et! like 50's, but they are 15x7, i run 25mm spacers, and they are madly tight on both sides of the arch, and scrub with weight
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.