Nova Parts, C20let /XE parts, and a Nova, all top spec parts

[ckd281081]

Decided, even though i pretty much have everything to build the Nova, that im not going to do it. Got another project on the go so just gonna do that. So here goes,.....

Fully Forged bottom end inc. +0.5mm forged pistons, rods, under piston oil squirters, steel gears, ARP’s throughout, brand new oil pump with steel gears and SBD nylon relief valve. Check the thread build for L401 TOY on Migweb.co.uk for more info. Hasn’t done any miles since I bought it off him.
Sold

Coscast Head. Zero miles. Polished, ported, skimmed the minimum amount, XE cam, uprated valve springs, Kent pulleys. Mint condition
£400 Sold

C20LET TD05 Turbo set up. Japspeed Tubular manifold, big 16G housing.. C20LET flange plate welded. Ready to plumb in and go. £350 Sold

Custom inlet manifold and throttle body for C20Let/C20XE. Big plenum. Has been mated up to Let inlet/head connections. Just needs tidied up. £170 Sold Deposit taken

550cc Injectors £70 Sold

LET/XE lightweight aluminium crank pulley. Brand new, £30 Sold

F28 Box. All Good. £230 Sold

Quaife Diff £350 Deposit taken Sold

Sachs 4 Paddle Clutch. Perfect condition. Inc plate £250 Sold

Lightened & Balanced Pot Flywheel £50 Sold

Full 3” JapSpeed exhaust off an Evo. Same flange as turbo. Ready to be welded to fit any car £120 SOld

2x AFM £45 each SOld

Let Phase 3.5 EDS ECU with power wheel £300 Sold

Let wiring Loom £80 SOld

Standard Let ECU no chips £50 Sold


Nova Rolling shell. Fully restored 3 years ago on a jig. No rot at all. Has been badly re-sprayed white though.
£500

Nova GSI kit. Bumpers and skirts, £100 Sold

Nova Roll Cage. Safety Devices. Bolt in. Brilliant condition £250 SOld

Nova equal length drive shafts inc. CV’s £60 Sold

Audi Quattro bearings and big block outer hub flanges to do the proper conversion (not the pishy M-Tec one) £50 Sold

Nova / Corsa B FK Blue coilovers. Not many miles. Not the cheap yellow ones. £150 (Bargain) Sold

4 Stud V6 Brakes £40 Sold

Speedlines, Black, Brilliant condition, no kerbing. All Centre caps there. Tyres, but not great £250 Sold

Digi Dash with transducer and plugs £60 Sold

Nova OMP front strut brace. Red. Great condition. £40

Nova 16 plate strengthening kit £70 sold

Nova poly bush kit, front and back. £70 sold

Nova – Let/XE Aeroquip fuel lines. Expensive parts. Brand new £30 Sold

Nova Let/XE with F28 mount set. Includes brand new rubbers. £90 sold

Nova Blue Antibes carpet (Rare) great condition £30 Sold

Let / XE started motor £25 sold

Let / XE Alternator £20 sold

Let Timing belt, brand new £10 sold

Let standard pistons & rods, £40 Sold

Let block with crank, slight lip on bores, just at the top, £30 Sold

[Benn]

Audi Quattro bearings and big block outer hub flanges to do the proper conversion (not the pishy M-Tec one) £50

Any pics of? How many miles have they done? Is this a fully built up set up? Or just the bits?

[yellow_seh]

I'm interested in the strengthening plate kit. Would you post?

[TWAG]

Custom inlet manifold and throttle body for C20Let/C20XE. Big plenum. Has been mated up to Let inlet/head connections. Just needs tidied up. £170

have you got any pics?

[conza123]

are they complete hubs or would i have to have mine remachined

[ckd281081]

brands new bearings, used hub flanges mate. No pics because im in Houston just now, but u know what new bearings look like lol. U just need to take them with ur hubs to a machinist and ask him to make them fit. Heres a link a link to the process http://www.obsessiveperformancedisorder.com/forum/viewtopic.php?f=5&t=16071&start=0

[ckd281081]

yes would post mate, £8

[ckd281081]

Custom inlet manifold and throttle body for C20Let/C20XE. Big plenum. Has been mated up to Let inlet/head connections. Just needs tidied up. £170

have you got any pics?

No mate sorry not just now, in Houston right now. Will be taking pics when im home

[ckd281081]

are they complete hubs or would i have to have mine remachined

u would have to get the hubs machined mate, but everythings there when thyre done

[w_wall_2001]

i sent you a pm on mig mate re some items

Will

[grooge]

pm'd

[ABoresta]

Hello would you consider posting the v6 brakes? and do you have a rear disc beam?

[yellow_seh]

I'll have the strengthening kit mate pm me you pay pal.

[cossienova]

Any pics of the fuel lines?

[gaf2]

Tried to PM you pal but ur inbox is full. Very interested in the roll cage. Am up in Inverness so could come down view/collect no bother.

Cheers Grant.

[ckd281081]

Hello would you consider posting the v6 brakes? and do you have a rear disc beam?

Hi mate yes of course. I think i can get postage for £15 (not bad for how heavy they are). No rear disc set up sorry

[ckd281081]

Any pics of the fuel lines?
Sold mate sorry

[ckd281081]

Tried to PM you pal but ur inbox is full. Very interested in the roll cage. Am up in Inverness so could come down view/collect no bother.

Cheers Grant.

Hi mate. Cage is still for sale yeah. Im home next week. You wouldnt be disappointed but its still for sale until its either paid for or a deposit taken

Cheers

[gaf2]

OK mate fair enough. You open to an offer?

[ckd281081]

No mate sorry, £250's more than cheap enough for a Safety Devices cage in this condition

[gaf2]

OK mate. How much of a deposit are you after and when would I be able to come get it?

[gaf2]

Also how do you want payment pal?

[ckd281081]

Paypal mate. You could come next weekend for it?

[gaf2]

Would I be able to come down Wednesday or Thursday night as am off to London on Friday? Whats your paypal mate and how much do you want right now for a deposit? Also just noticed you have a poly bush kit this still available?

Cheers Grant

[corsamaxi]

Hi What size dia, width and offset are the wheels ??

[ckd281081]

Hi mate. Unsure but U'll find all that info on google ;)

[wiggy123]

Do you still have shell. And how much....

[silk violet]

Pm'd you mate about some bits.?