View Full Version : Breaking Nova 1983 mk1 1.6
Well I have this Nova, needs too much work for me to make it roadworthy and MOT'd so will be stripping it for parts.
1983 (A reg) mk1, converted to 1.6 8v using full GTE set-up. Engine, gearbox, mounts, gear linkage are being kept by myself for another project but the rest of the car is available. Please PM me with your parts requests, but what's available off the top of my head that I know is in good condition:
Vectra B half leather front seats, look to be on Nova/modified subframes £40
Side bumpstrips (drivers warped slightly but rest OK) £20
Brown dash (Sport brown I think). Glovebox damaged.
Rear lights £8 each, LH headlight (RH damaged) £15
Cav slabs painted black (tyres are no good and large) £70
Rear axle complete (no ARB) £20
Front brakes with grooved discs (think 236mm) £25
GM mat set
Great condition mk1 shell, original rear arches with no rot, good chassis leg seams in bay, additional pics of usual areas upon request.
Sold items:
Snowplough
mk1 complete lockset (tailgate, doors, filler, ignition)
GTE spoiler
Clear front indicators
Bonnet
Front bumper
Windscreen
Full set of window surrounds incl rubbers
Brand new TA Technix coilovers (separate rears coilover front)
Full stainless exhaust system (Magnex?) to suit 1.6 downpipe unmodified
Full GTE fuel pump setup (pump, bracket in good condition, solid lines)
Fuel tank
Early round lock tailgate (no spoiler)
Full black door set handles/surrounds/winders
Bonnet lifters
Wings
Doors
Full GTE car loom incl multi plug in bay
Most things available, if you can't see them on the pics then just ask as lots already removed.
http://iainel.co.uk/images/NovaBreaking/FullFront.jpg
http://iainel.co.uk/images/NovaBreaking/FullRear.jpg
http://iainel.co.uk/images/NovaBreaking/EngineBay.jpg
http://iainel.co.uk/images/NovaBreaking/Interior.jpg
Items collected from Nottingham/Derby area or postage available on most things.
MORE PICS ON NEXT PAGE
dgbnova#1
27-04-14, 09:10 PM
I will take the tail gate please will look at other bits also would you send the tailgate don't need the glass or rubber tbh so lighter to send it or if I pay can you hold it for me ?
Scottcooper85
27-04-14, 09:21 PM
Would you post the bare drivers door if it's good and solid?
conza123
27-04-14, 09:33 PM
Pmd about lockset
I will take the tail gate please will look at other bits also would you send the tailgate don't need the glass or rubber tbh so lighter to send it or if I pay can you hold it for me ?
Tailgate can come bare no problem, that will be minus the spoiler as this is already provisionally sold, I can attempt to package it up if you want to arrange a courier at your own risk of damage. Happy to take payment and hold it for you.
Hi PM sent
Inbox full mate.
Will get better photos of the Snowplough later for those interested.
How much for steering wheel?
Would you post the bare drivers door if it's good and solid?
Drivers door is holed on the lower skin so not solid sorry, I think the passenger one is OK I'll investigate with a screwdriver for anyone interested.
How much for steering wheel?
PM'd
what clocks did this have in?
None and the odd reminants of a fascia/dial/mileage reading. lol
lol ok bud cheers for replying
Hi I will have snowplough PMs sent
dgbnova#1
28-04-14, 05:40 PM
Tailgate can come bare no problem, that will be minus the spoiler as this is already provisionally sold, I can attempt to package it up if you want to arrange a courier at your own risk of damage. Happy to take payment and hold it for you.
How are you removing the spoiler is it bonded and bolted on as removal can cause a lot if damage to the steel if you use a bar or screwdriver on it and I don't realy want the spoiler but don't want a dented boot ether and can you get pics if inside edges and any marks on the outsideplease
Spoiler is already off, has the original screw holes in the top that can be welded up, came off dead easy without any tools at all so I'll check nobody has damaged it taking it off previously and grab you some better pics.
More pics of stuff.
236mm vented brake setup (not ATE, what's the other caliper type?)
Coilovers, as I said brand new
http://iainel.co.uk/images/NovaBreaking/BrakesSuspension.jpg
Full GM tailored carpet set, all four, slight wear through the edge behind the pedals
http://iainel.co.uk/images/NovaBreaking/Carpets1.jpg
mk1 crossmember trim pieces for those with a shallow bumper
http://iainel.co.uk/images/NovaBreaking/CrossmemberTrim.jpg
Full stainless exhaust system, unsure on make, potentially a Mongoose system?!
http://iainel.co.uk/images/NovaBreaking/Exhaust.jpg
Clear indicators, LH headlight lense
http://iainel.co.uk/images/NovaBreaking/Indicator.jpg
Red ring steering wheel
http://iainel.co.uk/images/NovaBreaking/SteeringWheel.jpg
Slabs, good condition, painted black, some marks on paint, tyres are scrap
http://iainel.co.uk/images/NovaBreaking/Wheel.jpg
The snowplough! Can't find any tow covers or trim bits so it's just the main carcass. 2 cracks where the vents are which could be easily plastic welded back together, think there is some slight distortion on the front too
http://iainel.co.uk/images/NovaBreaking/Snowplough1.jpg
One of the cracks on the right, other is similar
http://iainel.co.uk/images/NovaBreaking/Snowplough2.jpg
http://iainel.co.uk/images/NovaBreaking/Snowplough3.jpg
jabba dee
28-04-14, 11:24 PM
Tank and snow plow and fuel lines how much??
What condition is the bonnet in m8?
scott.parker
29-04-14, 09:24 PM
Iain, thst sytem looks like a magnex to me...
How much for clear indicators?
Bonnets provisionally sold sorry. Scott tenner the pair? And free postage with your spoiler?
Updated page 1 with what's sold and what's still available including more bits I've found.
Pm'd you about steering then seen the closer picture. Still interested if you could get back on price
What you doing with the shell? Need 1 go re-shell my grass car. Not worried about rot but needs to be cheap
Shell will be for sale, over-all it's a very good and solid shell with very little rust, feel free to PM me what you consider cheap.
I would consider the shell also, i have a one that could be used as a grasser needs arches etc
Ben130 your inbox is full, will be asking more than you're after but thanks for your interest anyway
W88rdy I have some better pics of the shell if you want to drop me your email address via PM
steve1434
07-05-14, 11:57 PM
Hi mate. I am after side strips - are the mk1 same as mk2? They look the same from what I can see.
Could you do postage to Guildford?
The rubbery strips down the side? I started peeling one off and it looks like someone has previously removed and added them so they don't have the metal backing, so should re-stick onto another car with double sided no problem. I think early mk1s are different (squarer) but as it's just stuck on it'll fit either.
Can do postage £7.50 via next day courier?
Ok cheers, emptied my inbox now
What's your PayPal addy again please to pay for steering wheel?
CastIronDuke
10-05-14, 10:01 AM
How much for wing mirrors?
See PM. 15 pair of mirrors.
Would have been easier just dealing with you via here lol, oh and the picture messages turned up of the insulation today at lunchtime and didn't open on my phone lol
Yes, yes it would. At least I got a nice conversation with your dad who coughed up that he threw yours away lol
ocdstigy
15-05-14, 11:11 AM
How much for headlights bud?
You going to bell selling the top tine Iain ? I'm thinking of loosing my heated screen :)
paul080803
15-05-14, 12:45 PM
PM sent about GTE loom
I have one passenger side mk1 headlight if that's any good?
Top tint screen has sold as it was a bronze tint one sorry
Replied to PM re. loom
Iain I have pm'd you mate, drop me a text, prob easier with all the forum issues of late :-)
mk2maniac
18-05-14, 09:30 PM
Interested in black trim bits can see door handles and winders is there any more available and price please ta
Lots sold but still plenty left if anyone wants anything
Going to PV Show can take deposits on parts for delivery there.
Anyone fancy the shell? Better pictures of the usual areas available via email. Looking for £300.
PM'd about Wings and Grill
scott.parker
28-05-14, 01:35 PM
You sold the pump and bracket?
paul080803
28-05-14, 09:34 PM
How much for both front wings posted if dent and rust free?
paul080803
28-05-14, 09:58 PM
Damn, need an early set with no side repeater holes!
Togsodar
08-06-14, 02:08 PM
Hi, is the passenger door any good? If so how much would you want for it?
thanks
Not much left now so any bits required let me know
Looking for a home for the shell, very solid over-all underneath arches etc
silk violet
24-06-14, 07:34 PM
Pm'd
scott.parker
25-06-14, 09:02 AM
Iain, do you have the break servo still, is it a gte/gsi one?
Any closer pictures with the condition of the gm matts??
Cheers.
Replied Silk and PM'd Scott with better pics
coombsey
30-06-14, 08:33 PM
is the wiring intact or damaged complete car loom
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.