18mm Tie bar brkt spacers for F28. Is that enough?

[r.wadge]

Got a set of rose jointed tie bar brackets. Comes with 6 lowering plates at 6mm a piece. Would 18-18.5mm be enough to get in the F28?
Also if you know the size of the bolts that come with these that would be very helpful
:thumb:

[Benn]

I used 25mm spacer on the lower arm. Gives me about 5mm clearance...

[Plug]

i believe mine is spaced to around 25mm aswell i will double check later when they get refitted