Lambada sensor problems

[Mathew93]

I have a c16xe and lambada is snaped off and was wondering can i get a 1 wire or 4 wire lambada to work ok onit ?

[Southie]

See your wanted advert, I've put a quote that will be of use ;)

[Southie]

I'll put this here as well as your wanted advert for future reference.

The below maybe of use to you, I did this on my old C16xe and it worked btw, basically you can use a X16xe one

OK, according to AutoData CD for C16XE engine, the wires are:
Brown = heater (white wire on OS)
Red/Blue = heater (white wire on OS)
Blue/Yellow = Signal (black wire on OS)




It dosn't matter which of the white wires on the OS you connect up the ECU Brown or Red/Blue wires, they will still work. But its imporntnat that the black wire on the OS goes to the Blue/Yellow wire to the ECU.




If it still dosn't work then
1) duff OS
2) broken wire/connection from th ECU plug back to the ECU itself.