View Full Version : Corsa mc and servo fitting with Bulkhead in place
As above, i'd read a few threads but they have the bulk head taken out. But if i do it mine will be staying.
Clearance ok? Still easy enough to fit the plate for extra stretch? I've seen a few people use the Corsa base plate.. Is that strong enough?
Any info is good. Pics better.
Corsa plate will be fine esp if you are bracing the pedal. I welded mine in but you could probably bolt it like the corsa.
I'm sure Burgo fitted one with the firewall in place
I think i'd still weld it in. I'll copy jame's way like you did i think.
Nope I had no bulkhead lionel but it should still fit I think
You need to remember bout the clutch pedal as well, small bracket needed
I was gonna copy what count vaux did, IaIn's is the same i believe
You can modify the standard bracket to work.
craig green
07-02-14, 11:13 PM
Mine was done with the bulkhead in, no probs.
This pic should say a thousand words.
http://i30.photobucket.com/albums/c323/turbocraig/NovaGSi-WIP_pics/work_in_progress004.jpg (http://s30.photobucket.com/user/turbocraig/media/NovaGSi-WIP_pics/work_in_progress004.jpg.html)
Awesome Craig! Any more pics of the job?
scott.parker
09-02-14, 10:00 AM
Are these really worth the bother? Ok i can see Benn will get a cleane smoother bay, and on track cars you gain some breaking advantage and loose the old bar weight, but on a normal car like mine would it be worth the effort?
I may do this myself. Corsa always feel better braking and the servo is bigger I think so it make be a worth while mod even for a road car.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.